Regarding the design of high quality printing paper, this requires creativity and ideas from the group. Whether it is English letters, maybe Arabic numerals, maybe it is the promotional content of the activity, maybe it is just the LOGO, maybe there is nothing, as long as it is beautiful, as long as someone likes it, you can take it to make a sample, maybe you can take it to the printing plant for batch printing. How to make paper handbag printing?

As for the material of the handbag, it is generally a choice of thick paper, such as 250g coated paper, 300g copper paper, or the opposite thickness of single copper paper, kraft paper. It is absolutely brittle in kraft paper, copper paper and single copper paper. When it is used to make high quality printing paper, it must be covered with a film on the outside, so as to enhance its toughness, it will not break when it is folded. Guarantee the quality of high quality printing paper.

The film will of course increase the cost, if the cost of kraft paper will be lower than coated paper. Because the kraft paper itself has color and toughness, when the ink is printed on the press, the kraft paper itself will absorb some of the ink, resulting in color distortion, much worse than the original design color, and all colors will be dark. Therefore, when choosing materials to make a handbag, first look at all the colors of the design, and then maybe look at what materials are used to make the handbag before the design, which will save you a lot of trouble. Of course, kraft paper is also divided into colors, white and yellow. Toughness is also good or bad.

The rare high quality printing paper is half the size of full open paper and is best suited for making high quality printing paper. Half of the full paper is 570*840mm or 520*740mm. high quality printing paper has long, high and wide (wall), under normal circumstances, the length and width double plus 20mm dip does not exceed 840mm or 740mm, and the size of the high galler mouth and the bottom is not greater than 570mm or 520mm. The size of the ordinary top cut must be greater than 40mm, and the length of the bottom is required to be 80% of the width, so that the common area of the bottom will be more sufficient, so that the bottom of the handbag will be stronger and bear more weight.

high quality printing paper https://www.thpkgg.com/About-us.html